sanman capacitors
 

Capacitor Winding Elements, Automatic Winding Machine, Testing of MPP, Micron M.P.P. Film, Formation of Electrodes, viz. Measuring of Capacitance, LCR Comparison, Charge Discharge Test, H.V. testing, Tan Delta Measurement, Manufacturer, Supplier, Exporter, Sangli, Maharashtra, India

capacitors
capacitors
capacitirs
  
 

Capacitor Winding Elements

Construction:
The SANMAN capacitor elements are manufactured using MPP contains following procedure :
1.Testing of MPP.
The film taken for winding is measured for the various factors, viz. Micron, resistivity, tensile strength, heavy edge etc.
2. Winding:
The capacitor elements are wounded in air conditioned, dust free and humidity controlled winding machine on automatic winding machine. Exact tension using pneumatic control on winding machine
Capacitor Winding Elements
3. Formation of electrodes.
Using 99.99 % pure zinc alloy wire on automatic spraying machine the end capacitor winding are contacted.
The spray layer facilitates a high current load and ensures low inductance between the terminals and winding.
   
Capacitor elements are then thermally treated in an oven at 85 d c. Further these elements are tested under 750 V D.c. for short period for short clearing. Then these windings are forwarded for IS specified testing viz. Measuring of capacitance, LCR comparison, charge discharge test, H.V. testing, Tan Delta Measurement etc.
   

The capacitor elements are available in 5,6,7,8, and 10 micron M.P.P. Film.

Diameter of Elements.

M.F.D.

6 MICRON

7 MICRON

8 MICRON

10 MICRON

 

FILM

DIA.

FILM

DIA.

FILM

DIA.

FILM

DIA.

 

SIZE

Approx

SIZE

Approx

SIZE

Approx

SIZE

Approx

 

Micx HI

( mm )

Mic x HI

( mm )

Micx HI

( mm )

Micx HI

( mm )

2

-

-

7 x 37.5

18

8 x 37.5

19

-

-

2.5

-

-

7 x 37.5

19

8 x 37.5

21

-

-

3.15

-

-

7 x 37.5

20

8 x 37.5

23

-

-

4

6 x3 7.5

21

7 x 37.5

23

8 x 37.5

26

-

-

6

6x 37.5

25

7 x 37.5

27

8 x 37.5

30

10 x 50

31

 

6 x 50

21

7 x 50

24

8 x 50

27

-

-

8

6 x 50

23

7 x 50

27

8 x 50

31

10 x 50

37

10

6 x 50

26

7 x 50

30

8 x 50

33

10 x 50

41

 

-

-

-

-

-

-

10 x 75

33

12.5

6 x 50

29

7 x 50

32

8 x 50

37

10 x 75

37

 

-

-

.7 x 75

28

8 x 75

30

-

-

15

6 x 50

32

7 x 75

30

8 x 50

40

10 x 75

40

 

6 x 75

25

-

-

8 x 75

33

-

-

20

6 x 75

29

7 x 75

33

8 x 75

37

10 x 75

45

 

-

-

-

-

-

-

10 x 100

40

25

6 x 75

32

7 x 75

37

8 x 75

42

10 x 100

44

 

-

-

-

-

8 x 100

36

-

-

30

6 x 75

35

7 x 75

40

8 x 75

45

10 x 100

50

 

-

-

-

-

8 x 100

39

-

-

33

6 x 75

36

7 x 75

41

8 x 75

46

10 x 100

50

 

-

-

7 x 100

36

8 x 100

42

-

-

36

6 x 75

38

7 x 75

43

8 x 75

49

10 x 100

51

 

-

-

7 x 100

37

8 x 100

43

-

-

40

6 x 75

39

7 x 100

40

8 x 100

45

10 x 100

55

45

6 x 75

42

7 x 100

42

8 x 100

48

10 x 100

59

50

6 x 75

44

7 x 100

44

8 x 100

50

10 x 100

61